| Author |
Message |
willd
Feel the Power


Joined: May 13, 2008
Posts: 643
Location: halifax nova scotia canada
|
Posted:
Tue May 13, 2008 1:41 pm |
|
Hey fellow duck lovers, I mean dohc lovers.
I just joined the forum yesterday and read through alot of info. Very informative.
Just thought id throw up a post and say hi and how you doin. My name is Will and im from Halifax Nova Scotia Canada.
I have a 80 750 k model thats done up like a cafe racer. I traded a guitar amp for it that was worth maybe 400 bucks.
Buddy said the timing chain was stretched and slipped, but when i got it home realised the cam to cam chain was broke and came up through the valve covers. 60 000 kms on it and a bunch of junk laying in the bottom, time to tear into her. Everything was going good until setting the exhaust timing.
Thats when i found out that dingus off of ebay sold me a 126link chain from a 900. DOOOHHH!!! actually im the dingus for not counting links before. 8-(
I was going to inquire about a chain breaker, but now have decided to tear it apart and do it all again. Mainly because I used hi temp rtv silicone, and someone posted that this stuff is crap, and i agree it is. Stupid haynes book said to use rtv. and i forgot on shim thingy that goes against the gear selector drum.
And im not going to use my new did chains because they look like crap as well. I have a used set of honda chains 25000kms on them that im going to use. And the tensioners.
Anyways, im off to tear into it, assemble tommarow. let me know if im on the right track or not. peace. |
_________________ 1980 cb750k with 900f motor
WHERE DO ALL THE PODS GO?
Please model your bike in the year of your profile and always attach your signature to page.
"Always attach signature |
|
|
 |
750chop
Power Poster


Joined: May 09, 2008
Posts: 1055
Location: Davenport, Florida
|
Posted:
Tue May 13, 2008 1:45 pm |
|
welcome! im the other new guy, if you read in a little bit i made quite an entrance so i figured id be the first to say hello! |
_________________ 82 Cb750 Nighthawk Chopper.
Currently scrimping and saving for project number 2 |
|
|
 |
davevo
Feel the Power


Joined: Mar 26, 2008
Posts: 858
Location: Cape Town, South Africa
|
Posted:
Tue May 13, 2008 1:48 pm |
|
Welcome to DOHC Customs !!
Correct route from here on out is to pull the motor and do it up right. No point putting in an old chain to replace an old broken chain. Get the Honda chains (A&B chains) and two new tensioners. Split the cases and check bearings and primary tensioner and chain too. Then you can clean all the RTV shit out of the engine and put it all back together...easy as that
Oh, and don't forget to burn your Haynes manual at the same time. Download the manual in the Technical Documents section. If you need more info than that or get stuck on something, ask, there are lots of guys here who will be able to answer your questions |
_________________ 1988 CBX750F
Last edited by davevo on Tue May 13, 2008 1:52 pm; edited 1 time in total |
|
|
 |
nbhab
Turbo-Powered Poster


Joined: Aug 09, 2007
Posts: 5810
Location: New Maryland, NB, CANADA
|
Posted:
Tue May 13, 2008 1:51 pm |
|
This is going to be fun. BTW, welcome fellow Maritimer. You are one of a few good ones on here. |
_________________ 1982 CB900 Custom
Go Habs Go!!!!!!!!!!!!! |
|
|
 |
davevo
Feel the Power


Joined: Mar 26, 2008
Posts: 858
Location: Cape Town, South Africa
|
Posted:
Tue May 13, 2008 1:57 pm |
|
| nbhab wrote: | This is going to be fun. BTW, welcome fellow Maritimer. You are one of a few good ones on here. |
True, some people are less polite than I am with wise asses  |
_________________ 1988 CBX750F |
|
|
 |
750chop
Power Poster


Joined: May 09, 2008
Posts: 1055
Location: Davenport, Florida
|
Posted:
Tue May 13, 2008 2:00 pm |
|
ok, i know im setting my self up here, but wtf is a maritimer? |
_________________ 82 Cb750 Nighthawk Chopper.
Currently scrimping and saving for project number 2 |
|
|
 |
nbhab
Turbo-Powered Poster


Joined: Aug 09, 2007
Posts: 5810
Location: New Maryland, NB, CANADA
|
Posted:
Tue May 13, 2008 2:11 pm |
|
A Maritimer is one who lives in a Maritime Province in the nation of Canada. Nova Scotia, New Bruncwick and Prince Edward Island. However, A maritimer is anyone who lives by or spends a great deal of time near or on the sea, such as a mariner. How's that for a serious answer? |
_________________ 1982 CB900 Custom
Go Habs Go!!!!!!!!!!!!! |
|
|
 |
pierre900c
Feel the Power


Joined: Jul 26, 2007
Posts: 981
Location: Oromocto, New Brunswick, Canada
|
Posted:
Tue May 13, 2008 2:13 pm |
|
The Maritimes are the Canadian provinces of New Brunswick, Nova Scotia and Prince Edward Island (PEI) |
_________________ 1982 CB900 Custom
[URL=http://i75.photobucket.com/albums/i306/pierre77/DSC03979-1.jpg] |
|
|
 |
750chop
Power Poster


Joined: May 09, 2008
Posts: 1055
Location: Davenport, Florida
|
Posted:
Tue May 13, 2008 2:15 pm |
|
oh, so would i be a maritimer then? i live and spend much time near the ocean, though im not a canadian, although they make good beer, labatts is good sheeeit |
_________________ 82 Cb750 Nighthawk Chopper.
Currently scrimping and saving for project number 2 |
|
|
 |
nbhab
Turbo-Powered Poster


Joined: Aug 09, 2007
Posts: 5810
Location: New Maryland, NB, CANADA
|
Posted:
Tue May 13, 2008 2:19 pm |
|
Have you written and passed the test? |
_________________ 1982 CB900 Custom
Go Habs Go!!!!!!!!!!!!! |
|
|
 |
750chop
Power Poster


Joined: May 09, 2008
Posts: 1055
Location: Davenport, Florida
|
Posted:
Tue May 13, 2008 2:22 pm |
|
uh, nope... i can swim though and ride in the rain alot??? that help? |
_________________ 82 Cb750 Nighthawk Chopper.
Currently scrimping and saving for project number 2 |
|
|
 |
nbhab
Turbo-Powered Poster


Joined: Aug 09, 2007
Posts: 5810
Location: New Maryland, NB, CANADA
|
Posted:
Tue May 13, 2008 2:26 pm |
|
Sorry. You will have had to:
- thrown up in the back of a Mounties car
- hid booze under the front seat of a Mounties car and not been caught
- been on unemployment at least four times in your life
- screwed an ugly woman behind a tavern in a snowbank
- have at least one relative that is on two branches of the family tree
- lost three teeth while playing hockey
Otherwise, it's maritimer with a lower case 'm'. |
_________________ 1982 CB900 Custom
Go Habs Go!!!!!!!!!!!!! |
|
|
 |
750chop
Power Poster


Joined: May 09, 2008
Posts: 1055
Location: Davenport, Florida
|
Posted:
Tue May 13, 2008 2:30 pm |
|
[quote]
i only got 2 of those, and we have county mounty's here, that count? ive been drunk in one, but didnt throw up in it. hell i didnt even go to jail yet |
_________________ 82 Cb750 Nighthawk Chopper.
Currently scrimping and saving for project number 2 |
|
|
 |
nbhab
Turbo-Powered Poster


Joined: Aug 09, 2007
Posts: 5810
Location: New Maryland, NB, CANADA
|
Posted:
Tue May 13, 2008 2:34 pm |
|
Sorry man. I don't think you're quite ready yet. A little more work and you may get there some day. It's an elite club.  |
_________________ 1982 CB900 Custom
Go Habs Go!!!!!!!!!!!!! |
|
|
 |
D-Day
Here's Gumby!


Joined: Jul 23, 2007
Posts: 5668
Location: St Petersburg, FL
|
Posted:
Tue May 13, 2008 2:41 pm |
|
I spent a lot of time working in western Canada, mostly BC and much of it on (and under) the water. However, I think it's possible that time spent in the west actually goes against earning the true Maritimer handle.  |
_________________ ´81 CB900c Sold
2001 BMW K1200LT (RIP)
1991 Honda ST1100. 190K miles and smooth as silk. |
|
|
 |
Pointdiver
Feel the Power


Joined: Jul 25, 2007
Posts: 946
Location: Newton, MA
|
Posted:
Tue May 13, 2008 3:23 pm |
|
| pierre900c wrote: | | The Maritimes are the Canadian provinces of New Brunswick, Nova Scotia and Prince Edward Island (PEI) |
How about Newfoundland? |
_________________ Pete
83 CB1100F (Blue)his
83 CB1100F (Blue)hers
80 CB750C(sold)
81 750F w/ Wiseco 826 & 900cams
|
|
|
 |
krisj
Power Poster


Joined: Apr 14, 2008
Posts: 1200
Location: Quincy, FL, USA
|
Posted:
Tue May 13, 2008 3:55 pm |
|
Welcome. Sounds like you have your hands full with your newly acquired machine. Listen to what the veterans around here have to say and you will have a bike you'll love more than your old lady.
You also are lucky in that you live near "smokes". His brain is a wealth of knowledge. He'll get around to greeting you soon, I'm sure.
....."Move away from the silicone!" |
_________________
1982 CB 750 SC in Custom trim
1981 CB 900 C
1983 CB 1000 C |
|
|
 |
nbhab
Turbo-Powered Poster


Joined: Aug 09, 2007
Posts: 5810
Location: New Maryland, NB, CANADA
|
Posted:
Tue May 13, 2008 4:09 pm |
|
| Pointdiver wrote: | | pierre900c wrote: | | The Maritimes are the Canadian provinces of New Brunswick, Nova Scotia and Prince Edward Island (PEI) |
How about Newfoundland? |
Nope. It is one of the provinces in the group known as the Atlantic Provinces though but we exclude them in the Maritime Provinces. |
_________________ 1982 CB900 Custom
Go Habs Go!!!!!!!!!!!!! |
|
|
 |
nbhab
Turbo-Powered Poster


Joined: Aug 09, 2007
Posts: 5810
Location: New Maryland, NB, CANADA
|
Posted:
Tue May 13, 2008 4:10 pm |
|
| D-Day wrote: | I spent a lot of time working in western Canada, mostly BC and much of it on (and under) the water. However, I think it's possible that time spent in the west actually goes against earning the true Maritimer handle. |
True. But the west is made up in great portion of Maritimers, due to the lack of work around here for decades and the abundance of high paying jobs in the West, particularly Alberta. |
_________________ 1982 CB900 Custom
Go Habs Go!!!!!!!!!!!!! |
|
|
 |
davevo
Feel the Power


Joined: Mar 26, 2008
Posts: 858
Location: Cape Town, South Africa
|
Posted:
Tue May 13, 2008 4:19 pm |
|
| krisj wrote: | Welcome. Sounds like you have your hands full with your newly acquired machine. Listen to what the veterans around here have to say and you will have a bike you'll love more than your old lady.
You also are lucky in that you live near "smokes". His brain is a wealth of knowledge. He'll get around to greeting you soon, I'm sure.
....."Move away from the silicone!" |
I was wondering when holysmokes was going to rock up, he's been offline everytime I checked. Yes, very knowledgable and all around good guy, he can help you a lot.
I was just thinking about that 750, if you open up the engine and find more uglyness, why not ditch it and get a nice 900 or 1100 to put in there. A totally rebuilt 1100 just sold recently for $1500. Not an awful lot of money and not much more than rebuilding your 750 will cost, maybe even less depending on what all it ends up needing. Always keep your eye out for a trusted engine. By trusted I mean dont waste money on ebay, you could end up with a bucket of shit. Watch the forums and when one of our guys sells a motor grab it. It'll last you years and in the case of the one I mentioned, run like a raped ape for years too  |
_________________ 1988 CBX750F |
|
|
 |
fasterspider
Turbo-Powered Poster


Joined: Jul 25, 2007
Posts: 9956
Location: Studio City, Kalifornicate, USA
|
Posted:
Tue May 13, 2008 5:17 pm |
|
Welcome to DOHC Customs.
RTV sucks and so do stretched or broken cam chains.
Do the right thing and the rewards will be astounding. |
_________________ Ray #1 The fasterspider
You must have bumped your head
bakmanrayman@yahoo.com
fa |
|
|
 |
nbhab
Turbo-Powered Poster


Joined: Aug 09, 2007
Posts: 5810
Location: New Maryland, NB, CANADA
|
Posted:
Tue May 13, 2008 5:17 pm |
|
Yup. Smokes will help you big time. He's down the road in Middleton. He's a fart smucker. |
_________________ 1982 CB900 Custom
Go Habs Go!!!!!!!!!!!!! |
|
|
 |
holysmokes
Admin

Joined: Jul 25, 2007
Posts: 37017
Location: ridge road springfield nova scotia
|
Posted:
Tue May 13, 2008 8:03 pm |
|
just got back
actually its merrytimer
you bought mario's bike? correct
I told him the chain was stretched and needed replacing,
he built a home made 4/1 header
I sold him alot of used parts in the past, for that bike
I have a drop in 750 engine, if you so need one
listen to my you tube link |
_________________ On a steel horse i ride
People are just as happy as they make up their
minds to be.” ― Abraham Lincoln
http://i559.photobucket.com/albums/ss31/johnveinot/DSCF1663.jpg
04 vl800
09 50 honda jazz
Paint gelding |
|
|
 |
willd
Feel the Power


Joined: May 13, 2008
Posts: 643
Location: halifax nova scotia canada
|
Posted:
Tue May 13, 2008 9:28 pm |
|
Yeah that was his name, from greenwood.
Pretty nice looking bike. I didnt know that was a custom exhaust, it looks sick. Nice machineed parts he made too.
I did want a drop in, but ive rebuilt this one from the ground up. I reused the bearings just cause they cost too much. I dont drive hard anyways, and they arent too far gone. Wont last forever though. Othe rthan that one of the exhaust valves was trashed, so I replaced that.
Relapped all the valves, deglazed the cylinders, new rings seals and gaskets.
Anybody know if D.I.D chains are any good?
I have a set for a 750, plus the long one for a 900.
They seem small and kinda dont fit right on the sprockets.
Im not going to take the chance with them so im going with used honda chains.
I know this is only a half assed rebuild, but its not that
bad of an engine to tear into. Besides, I like blowing up stuff, especially Mazdas!!!
IS that your bike on the video? |
_________________ 1980 cb750k with 900f motor
WHERE DO ALL THE PODS GO?
Please model your bike in the year of your profile and always attach your signature to page.
"Always attach signature |
|
|
 |
willd
Feel the Power


Joined: May 13, 2008
Posts: 643
Location: halifax nova scotia canada
|
Posted:
Tue May 13, 2008 9:38 pm |
|
Oh, update....... bottom end is back together, will finish motor tommarow then put back in bike....not looking forward to that. Might not happen though because I've got football practise. Might get away from work early.
Stay tuned................... |
_________________ 1980 cb750k with 900f motor
WHERE DO ALL THE PODS GO?
Please model your bike in the year of your profile and always attach your signature to page.
"Always attach signature |
|
|
 |
|
|